Search for:
Welcome Guest
[Login | Register]
 
  Homepage     Contact Us     About Us  
Shop by Category
Language
 
About Flexographic Presses

About Flexographic Presses

Flexographic presses are capable of producing good quality impressions on many different substrates and is the least expensive and simplest of the printing processes used for decorating and packaging printing. The use of flexographic printing presses is on the rise. There are two primary reasons for this: 1) it is a relatively simple operation; and 2) it is easily adapted to the use of water-based inks. The widespread use of water-based inks in flexographic printing means a large reduction in VOC emission compared to the heatset web or gravure printing processes.

Stack Type

The stack press is characterized by one or more stacks of printing stations arranged vertically on either side of the press frame. Each stack has its own plate cylinder which prints one color of a multicolor impression. All stations are driven from a common gear train. Stack presses are easy to set up and can print both sides of the web in one pass. They can be integrated with winders, unwinders, cutters, creasers, and coating equipment. They are very popular for milk carton printing. A drawback of stack presses is their poor registration; the image position on every printed sheet is not as consistent as in many other printing processes.

Central impression cylinder (CIC)

Central impression cylinder (CIC), like the common impression rotary letterpress, use a single impression cylinder mounted in the press frame. Two to eight color printing stations surround the central impression cylinder. Each station consists of an ink pan, fountain roller, anilox roll, doctor blade, and plate cylinder. As the web enters the press it comes into contact with the impression cylinder and remains in contact until it leaves the press. The result is precise registration which allows CIC presses to produce very good color impressions. CIC presses are used extensively for printing flexible films.

In Line

In Line flexo printing is similar to a unit type rotary press or the stacked press except the printing stations are arranged in a horizontal line. They are all driven by a common line shaft and may be coupled to folders, cutters, and other postpress equipment. These presses are used for printing bags, corrugated board, folding boxes, and similar products.

Newspaper Flexographic Presses

A newspaper flexographic press consists of multiple printing units, each unit consisting of two printing stations arranged back-to-back in a common frame. The use of paired stations allows both sides of the web to be printed in one pass. Multiple printing stations are required to print the many pages that make up a typical newspaper. Single and double color decks, stacked units, or 4-, 5-, or 6-color units are sometimes positioned above those units where the publisher wants to provide single or multiple spot color, spot color for both sides of the web, or process color, respectively (Buonicore).

Commercial Publication Flexographic Presses

Commercial publication flexographic presses are compact high-speed presses with wide web capability that utilize dedicated 4-, 5-, or 6-color units. Typically, two four-color units are paired in one press to allow printing on both sides of the web. Publication flexographic presses generally incorporate infrared dryers to ensure drying of the waterborne ink after each side of the web is printed (Buonicore).

*Copyright PNEAC.

Popular Products
 
Mailing List
Subscribe to our mailing list below:
Email:
 
Powered by CubeCart
Copyright Devellion Limited 2006. All rights reserved.